fairmont machinery logo
Contact Us
fairmont machinery logo
Contact Us

Resources

Video Library

Sort By:

Revolution Flat Lasers
Revolution Tube Lasers
VisiWeld Robotic Welding
NS Deburring
revolution x logo

Fully Enclosed high-speed Flat Lasers with Automation & Storage

Revolution X/XL – 60kW on 2.8in Steel

60kW oxygen cutting can cut up to 2.8" of carbon steel in normal production

RevolutionX – 7.5 Holes Per Second

Cutting at an incredible 7.5 holes per second, the Revolution X is the fastest rack & pinion laser today.

USE ARROWS FOR MORE

RevolutionX – Roll Top Roof

Easy access and easy maintenance across the entire Revolution Series.

Revolution X/XL – Pull-Out Trays

Scrap conveyors seem like the right answer... until you run one. Keep it simple and reliable when cutting at high power.

Revolution X/XL – 45kW on in Steel

Revolution cutting 2" with oxygen assist gas at 45kW.

Revolution X/XL – 30kW on .75in Steel

Watch 30kW rip through 3/4" with nitrogen assist gas.
Group 134 (2)

Revolution X/XL – Drop & Cut

Quickly utilize remnants from the operator panel with options like drop and cut.

Revolution X/XL – Locating Round Parts

Capabilities to handle part location, along with drop and cut capabilities, on round parts.

Revolution X/XL – Oxygen vs Nitrogen

Understand the difference in cut quality when using oxygen and nitrogen assist gas.

Revolution X/XL – 60kW on Stainless

See the power of 60kW and understand the impact power has on cycle time.
revolution xl open table fiber laser logo

Open table heavy-duty flat lasers with bevel

Revolution X/XL – 60kW on 2.8in Steel

60kW oxygen cutting can cut up to 2.8" of carbon steel in normal production

Revolution XL – High-Power Bevel Cutting

Bevel cutting is available across Revolution X and XL lasers at all power levels.

USE ARROWS FOR MORE

Revolution X/XL – Pull-Out Trays

Scrap conveyors seem like the right answer... until you run one. Keep it simple and reliable when cutting at high power.

Revolution X/XL – 45kW on in Steel

Revolution cutting 2" with oxygen assist gas at 45kW.

Revolution X/XL – 30kW on .75in Steel

Watch 30kW rip through 3/4" with nitrogen assist gas.

Revolution XL – Bevel Countersink

Effortless countersinks without secondary processing using laser bevel cutting.
Group 134 (2)

Revolution X/XL – Drop & Cut

Quickly utilize remnants from the operator panel with options like drop and cut.

Revolution X/XL – Locating Round Parts

Capabilities to handle part location, along with drop and cut capabilities, on round parts.

Revolution X/XL – Oxygen vs Nitrogen

Understand the difference in cut quality when using oxygen and nitrogen assist gas.

Revolution X/XL – 60kW on Stainless

See the power of 60kW and understand the impact power has on cycle time.
revolution t tube laser logo

high-speed tube lasers with bevel and automation

RevolutionT – High-Speed Tube Cutting

The shortest cycle times in the industry when fly cutting on the RevolutionT

RevolutionT – Tube Bevel Cutting

Tube bevel cutting on a floating table. 45 degrees in both directions.

USE ARROWS FOR MORE

RevolutionT -Mechanical Chuck Design

Sealed mechanical chuck design for improved reliability, auto-centering and isolated pneumatics.

RevolutionT/TL – C Channel Cutting

Clean cut c-channel part off the Revolution TL

RevolutionT – Burn-Through Protection

Optional inner mandrel to prevent burn-thru and slag on the inner diameter of small and large tube.

RevolutionT/TL – Dust Extraction

Thoughtful dust collection design with multiple collection points across Revolution machines.

RevolutionT – Floating Support

Option to support long, thin tube susceptible to sag over the length.

RevolutionT – Automatic Loading

Bundle loading on the RevolutionT allows for easily loading and high production.
revolution tl tube laser logo

heavy-duty tuber lasers with bevel and automation

RevolutionTL – Tube Bevel Cutting

Large format tube bevel cutting up to 45 degrees in both directions.

RevolutionTL – Zero-Scrap Cutting

Zero-scrap cutting on the 3-chuck Revolution T, with the center chuck able to floating across the cutting envelope.

USE ARROWS FOR MORE

RevolutionT/TL – C Channel Cutting

Clean cut c-channel part off the Revolution TL

RevolutionT/TL – Dust Extraction

Thoughtful dust collection design with multiple collection points across Revolution machines.

RevolutionTL – Tube Measuring

Tube measuring on the RevolutionTL ensures minimized scrap on long tubes.

RevolutionTL – Semi-Auto Unloading

Semi-Automatic unloading simplifies operation of the tube laser and significantly increases output.
visiweld ai logo

Robotic Welding with Vision and Intelligence

VisiWeld – Large Beam Welding

VisiWeld Pre-Fabricated cells for simple, large format welding are available at a discount!

VisiWeld – Large, High-Mix Welding

Watch VisiWeld in production, laying consistent, multi-pass welds on a high-mix of products.

USE ARROWS FOR MORE

VisiWeld – Retrofit Cell

VisiWeld retrofits provide the opportunity to expand the utilization of existing cells, for a lower up-front cost.

VisiWeld – Tube Welding

Tube welding shows VisiWeld's ability to coordinate robot &positioner movement while adapting to variable fit-up.

VisiWeld – Crane Welding

VisiWeld simplifies large-format welding, creating programs in minutes and adapting to inconsistent fit-up.

VisiWeld – Process Overview

See the entire VisiWeld process - art to part.

VisiWeld – Coordinated Motion

Coordinated motion of the position and robot maintains weld quality. Almost impossible with a pendant. Standard with VisiWeld.

VisiWeld – Machine Vision

Eliminate the need for hard fixturing with machine vision. The program adapts to avoid the obstacles.

VisiWeld – Multi-Pass Welding

Multi-pass welding on a brand new part. See the results.

VisiWeld – Laser Seam Scanning

Adaptive welding has historically been done with manual touches. VisiWeld cuts the scan time by at least 10x.

VisiWeld – Auger Welding

Augers are difficult to weld manually and pose an unsolveable problem for standard robotic welding. VisiWeld solves the problem.

VisiWeld – Excavator Welding

An excavator bucket is a good example of structural and agricultural parts with inconsistent fit-up.

VisiWeld – Turbine Welding

See the advantages of VisiWeld in a complex and highly variable production environment.

VisiWeld – Custom Layouts

Unlimited cell layout options - from small footprint to hundreds of feet in length.
ns maquinas logo

Fabrication is Complex. Keep Deburring Simple.

DM1100 DC – Machine Walkthrough

Technical walkthrough of the DM1100 DC deburring and edge-rounding machine.

DM1100 ZC – Machine Walkthrough

Technical walkthrough of the DM1100 ZC machine.

USE ARROWS FOR MORE

DM1100 C – Perforated Aluminum

The DM1100C removes any burr on aluminum parts - including on small, internal features.

DM1100 C – Punched, Perforated Steel

Edge-Rounding internal contours on steel parts on the DM1100 C machine.

DM1100 ZC – Plasma Parts

Watch the DM1100 ZC machine process a variety of plasma cut parts.

DM1100 ZC – Nitrogen Dross, Internal Contours

Remove substantial laser dross on internal contours, leaving a soft edge, with the DM1100 ZC machine.

DM1100 ZC – Mixed Laser & Plasma Parts

Processing of a variety of laser and plasma cut parts on the DM1100 ZC machine.

DM1100 DC – Product Video

Complete overview of the DM1100 DC machine for deburring and edge-rounding plate metal.

DM1100 ZC – Product Video

Complete overview of the DM1100 ZC machine for deburring and edge-rounding.

DM1100 C – Product Video

Complete overview of the DM1100 C machine for edge-rounding and aluminum processing.

DM1100 ZC – Mixed Steel Processing

The DM1100 ZC is the ideal machine for everyday processing of mixed steel parts.

DM1100 DC – Standard Processing

Standard plasma processing. Non-flat part requiring only paint-prep. Note the result and minimized abrasive use.

DM1100 DC – Stainless Steel with Nitrogen Dross

Deburring machines seem slow... until you try to run one. Process hundreds to thousands of parts per hour.

DM1100 ZC – Aluminum Finishing

Aluminum finish on a DM1100 ZC deburring & edge rounding machine.

DM1100 DC – Extreme Nitrogen Burr

An extreme case highlighting the capabilities of the DM1100 DC to handle nitrogen dross.

DM1100 DC – Operator Margin for Error

The high-friction conveyor and magnetic track allow for many "small and tall" geometries to be processed.

Return Conveyor

Return conveyors are simple upgrades to greatly improve the operator experience.

DM1100 2C – Product Video

Upgrade any machine configuration to process both sides of the part simultaneously.

DM1100 DC – Warped Material Processing

The floating drum on the DM1100 DC machine allows for deburring on parts that do not lie perfectly flat.

DM1100 ZC – Small Part Processing

Small part process on a DM1100 ZC machine due to the high-friction conveyor belt.

DM1100 ZC – Heavy Nitrogen Dross

Heavy nitrogen dross removal on a DM1100 ZC deburring & edge rounding machine.

DM1100 ZC – Machine Walkthrough

Technical walkthrough of the DM1100 ZC machine.

DM1100 DC – Machine Walkthrough

Technical walkthrough of the DM1100 DC deburring and edge-rounding machine.

Our Leading Brands

revolution series logo
Revolution Fiber Lasers

High-power and high-performance flat and tube lasers backed by the industry's best service and support. Learn More

Visiweld_Logo_Full_Color_Rgb_900px_w_72ppi
VisiWeld AI™

Next Generation Robotic Welding. Click-to-weld offline programming and machine vision combine to apply robotic welding in high-mix production. Learn More

ns maquinas logo
NS Deburring

The simplest way to edge round and debur. Efficiently remove dross, slag, and burr, and edge round. Easy to operate, optimized for laser and plasma. Learn More